4 like 0 dislike
10.1k views

給予一個數列,請寫一個程式找出其中最大的數,最小的數,以及出現最多次的數。

 

輸入說明:

一開始會先輸入一個正整數N,N不會超過1000,接下來的N個正整數就是要處理的數列。

 

輸出說明:

請依序輸出三個數,分別代表最大的數,最小的數,出現最多次的數。如果出現最多次的數不只一個,請輸出其中最大的那個。

 

輸入範例:

5
1 1 2 2 3

 

輸出範例

3 1 2
[Exam] asked in 2017-1 程式設計(一)AD by (30k points)
ID: 38940 - Available when: 2017-12-23 09:00 - Due to: 2017-12-23 12:10
| 10.1k views

16 Answers

0 like 0 dislike
Hidden content!
#include<stdio.h>
int main()
{
    int x,max=0,min=0,size=0;
*** * **** ** *** * * ** **** * ** ***
* * ** ****** * ** ** * arr[x],amount[x];
* * * **** *** ** ** i;
*** ** * * * * * *** * * *** *
* * * ** * ** * * * * ** ** ** * ** ** * * *** **** * ** ***
* ***** *** * * ** * * * **
    int j;
**** ******** ** *** ** * ** **
    {
*** ** * ** * ** * * ** * ** * * *** * * * * ** ****
*** ** * *** **** ** ** *** **** * * ** * ** * * * * * ** ***
** * ** ** * * * ** *** * * * * * ** * * * * ***** *
*** ** ** * *** *** *** * * ** ** ****** *** ** * * * ***** *** * * * * * ***
    }
** * ** **** * * * * * * ** **
    {
* ** ** ** ** * ** ** * * ** ** **** *** ** * * **
** *** **** * ** * ** * *** ** ***** ***** * * **
*** * **** **** ** * ** * **** **** * ** ***** * * *** ** * ***
* ** *** ** * * ** * *** ** ** *** * * * * ** * ********** * * * *** ** * * * * *
* * * **** **** ** *** * ** * ** * ** **
    }
    int temp=0;
* * ** * **** **** * ** ** *
    {
** *** * ** **** * ** * * *** * *** ** ***** * **** * * *** *** * *** ***
* * * **** * * * * * ** ** ***** *** **
* *** * * *** ** * * ** * * * ** **** * * * ** * **** * *** ** *
* * ** * * *** ** * * * * * **** * ***** ** * * * ** ** * ** ** ** ** ** * **
** * ** ****** ** ***** *** * * * **
    }
* *** ** ****** * *** * * ** * %d %d\n",max,min,arr[size]);
* * *** ** *** * * ** * 0;
}
answered by (160 points)
0 0
Case 0: Correct output
0 0
-----------Re-judge-----------
Case 0: Wrong output
0 like 0 dislike
Hidden content!
include<stdio.h>

int main()
{
** * * * **** * ** n,max=0,min=0;
* * * * ** ** ** num=0,temp=0;
* ** * * ** *** * * * ****** ** * ******
* * **** **** * * * *** arr[1000],amount[1000];
** ***** *** * * * i;
** * * * **** ** * ************ **
* * **** *** * ***** *** * ** **** * * * * * *** * * * * * * * *** * *
* ** * ** * * ** ** * ** *
*** * *** ** * j;
    
* *** ** ****** ** ** * * ** * *** **
    {
***** * * *** ** ** * ** *** ***** * * ** * *
* * * * *** ****** * * ** ** ** * * *** * **** ** ** * * **** *** **
*** * * ** * ***** ** ** **** **** * * ** * ** * ** * *
* *** * ** *** * ** *** ** * ********** * * *** ******* * ** ** *
    }
*** *** ***** *** * ** * * ** *
    {
* ** * *** * ***** * * * * *** * * *
***** ** **** * *** * ******* ** ** **
* * ** * * * ***** *** *** * *** ** ** * * * * * ** *** * * **** ****
* ** ** *** ** * * ********* ***** ** * * ** *** ****** * ** ***** **** * ** * * * * * **
**** * ****** * ****** * * * * * **
* *** * *** **
   
    
** ***** * * * ** *** * *** * *
    
    {
* **** * * ** * * ** * ** * * ********* ** ** ** * *** * * * ***
* ** ****** * ** ****** * *** ** *** ** **** * ****
* ** * ** *** ** ***** * * *** *** * * * ** * * * **** *** ******
**** ***** *** ******* ***** * ** * * ** *** * * * ******** ** * *
**** ** * ** *** **** *** ** * * **
    }
* ***** *** * * ** **** %d %d\n",max,min,arr[num]);
* ** * *** ** * *** ** * 0;
    
}
answered by (174 points)
edited by
0 0
prog.c: In function 'main':
prog.c:11:18: warning: format '%d' expects argument of type 'int *', but argument 2 has type 'int' [-Wformat=]
          scanf("%d",arr[j]);
                  ^
prog.c:13:8: error: 'max_length' undeclared (first use in this function)
     if(max_length<current_length)
        ^~~~~~~~~~
prog.c:13:8: note: each undeclared identifier is reported only once for each function it appears in
prog.c:13:19: error: 'current_length' undeclared (first use in this function)
     if(max_length<current_length)
                   ^~~~~~~~~~~~~~
prog.c:18:20: error: expected expression before '{' token
     current_length={0};
                    ^
prog.c:22:36: error: 'n' undeclared (first use in this function)
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                    ^
prog.c:22:41: error: 'max_lenhth_num' undeclared (first use in this function)
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                         ^~~~~~~~~~~~~~
prog.c:22:55: error: expected ')' before ']' token
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                                       ^
prog.c:22:55: error: expected ';' before ']' token
prog.c:22:55: error: expected statement before ']' token
prog.c:22:56: error: expected statement before ')' token
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                                        ^
0 0
prog.c: In function 'main':
prog.c:11:18: warning: format '%d' expects argument of type 'int *', but argument 2 has type 'int' [-Wformat=]
          scanf("%d",arr[j]);
                  ^
prog.c:13:8: error: 'max_length' undeclared (first use in this function)
     if(max_length<current_length)
        ^~~~~~~~~~
prog.c:13:8: note: each undeclared identifier is reported only once for each function it appears in
prog.c:13:19: error: 'current_length' undeclared (first use in this function)
     if(max_length<current_length)
                   ^~~~~~~~~~~~~~
prog.c:18:20: error: expected expression before '{' token
     current_length={0};
                    ^
prog.c:22:36: error: 'n' undeclared (first use in this function)
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                    ^
prog.c:22:41: error: 'max_lenhth_num' undeclared (first use in this function)
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                         ^~~~~~~~~~~~~~
prog.c:22:55: error: expected ')' before ']' token
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                                       ^
prog.c:22:55: error: expected ';' before ']' token
prog.c:22:55: error: expected statement before ']' token
prog.c:22:56: error: expected statement before ')' token
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                                        ^
0 0
Case 0: Wrong output
0 0
prog.c:1:8: error: expected '=', ',', ';', 'asm' or '__attribute__' before '<' token
 include<stdio.h>
        ^
0 0
prog.c:1:8: error: expected '=', ',', ';', 'asm' or '__attribute__' before '<' token
 include<stdio.h>
        ^
0 0
prog.c:1:8: error: expected '=', ',', ';', 'asm' or '__attribute__' before '<' token
 include<stdio.h>
        ^
0 like 0 dislike
Hidden content!
#include<stdio.h>

int main()
{
    int temp,n,most,mostt=0,big,small;
    int i,j;
    
* * **** * * *** *** **** * * * * **** ** *** ** *
    
    int input[1000]={0};
    
** * * * * ***** * ** **** * *
** * * * * **** ** ** ** * * ** *** * * *** *
    
** ** * * * ****** * * ** * ***
    {
* *** *** ** ** * * * *** * *** * ** * ** * ** ** * ** * * * ** ** ** * * ********** * t=0;
***** ** ******* *** *** * * ** ** ***** *** ** ** * * *** ** ** ** *** ** * ** *** ** ** ** ** **** ** ******* ** * **
** *** * * * * * * * * * * **** * * **** * * ** * * ** * ** * * * * * * ** *** *** * ***** * *
***** *** * * * * * ** ***** * ** * * * ** * * * * ** * ********* * * * * * * ** ** *** * ** ** ** * ** *** *** ******* **** *** *** * * * * ** **** * * * ** * * ***** * ** *** * ** *** **
** *** ** * * ** ** ***** *** ***** ** * * * * ** * * * ***** **** ** ** * * * *** ** ***** ** * * * * * * * * * * ** *** * ***** * ***** ******** ** * * * * * * * * ** * * * ** * **** * ** ****
**** ** ** * * *** *** * * **** ** **** * * * **** * * * * * * * *** * * * * * *** * ** ****
***** * ******** *** * ** ** * ***** **** * ** ******** * * ** ** *** ****** ** *** * * ** ** * * * ** * && most<input[i])
******* ** * * * ** *** *** * * ** * * * ** * ** ** ** * * * * ** * **** ******* * *** ** * *** **
* *** **** *** * ******* *** *** *** ** * * ** * *** * * ** * * *** * * ** *** * * * *** ** * * **** ** * * * *** ** * **** * * ** * * ** * ** *** * * * ** ******** **
* ** **** * ** ** * * *** *** ** * * ** ** ** * ** ***** * * ** * * ** **** * * *** * ** ***** ** * ***** ** * ** * ** ** * ***** *** ** *** * ******* *** ** ** ** ** * ** ****
* * * * * *** ***** * * * * ** ** ** * * * ** *** * ** ** ** * ** *** *** * **** * ** ****** ** * **** ****
    }
    
* ** ** * * *** *** ** *
*** ** ** * * ** ** *** *
    {
* ** * * * *** * ** * ** * * ** ** ** ***** ** ** * * * ** * * ***** *** *** **** *** * ** * * * * * * **** * * ******* **
* ** ** ** * ******* ** ** **** * ** * * ** * ** * ********* * * *** ** * * *** *** ** ***** * * * *
    }
    
** * * * ** * * * ** *
*** **** * * ** *** * ***** * *** **
    {
* * *** *** * *** * * ***** * * ** *** ** * **** * * *** * * * ****** * ** * ** **** * ** * * * * **** ***
** **** * * * * * ** * ** * **** ****** ***** * ** * * ** * * * * *** ** * ** ** * * *** *** *
    }
    
************ * * * * ** * %d %d\n",big,small,most);
    
    return 0;
    
}
answered by (215 points)
0 0
Case 0: Correct output
0 0
-----------Re-judge-----------
Case 0: Wrong output
0 like 0 dislike
Hidden content!
#include<stdio.h>
int main()
{
    int x,max=0,min=0,size=0;
* * * * * **** * ***** * **** ** * ******
* ** * * * * ** *** * * *** arr[x],amount[x];
** * * * * **** ** ** i;
* * * *** ** * * * * ** * *****
** ** * * ** ** * ***** * * ** * ** ** **** ** * *
* * *** ****** *** ** * * ****
    int j;
* * *** * * * * * ** *** ** ****
    {
**** * ** * *** ** * *** ***** * * ** * ** **
* * *** * ** *** *** * ***** ** * * * ** ** * ** ** ** ** * * *
* *** ** * * * *** * * * ** * ***** * * * **
* *** * ** * * ** * * ***** ** *** * ***** * * ******* ** ** * **
    }
****** *** ***** ****** ******* *** ** **
    {
** ***** *** * * ** *** * ** **** * ** * ** ***** ** ** *
* * * * * * * * * * ** ** *** * * *******
** * ** *** ** ***** ** **** * *** * **** * ** *** ** * ** ** * *** *** *
* * * * *** **** * * * * * * * * * * ****** ** ** * *** * ** * *** ** *
** * * ** * * * * * * ** ****** * * * *
    }
    int temp=0;
***** *** ** * ** * * *** **** * *
    {
** * * ** * ** ** ****** ** * * * *** * **** *** * *** ** * *** * ***** * ** * **** *
******* **** * * * * *** * * ** * *
* * * *** ** * * * ** * * **** **** * ** *** **** * * * *** ** * * *
** ***** * * ** ** ** * ** *** * ** ** * ** ***** * ***** ** * * * *****
* * ** * ****** * * * *** * * * * ** ** * *
    }
* *** * ** **** * * ** * %d %d\n",max,min,arr[size]);
**** * * **** * **** * 0;
}
answered by (100 points)
0 0
Case 0: Correct output
0 0
-----------Re-judge-----------
Case 0: Wrong output
0 like 0 dislike
Hidden content!
#include<stdio.h>
int main()
{
** ***** * ****** ** ** n, current_num, current_num_length, max_length = 0, max_length_num, temp;
*** *** *** ** ** i, j, k;
* * ** * * * ** * * arr[1000];
* ** * * ** * * ** * * **** ** * ******* ****
    
* * * * * * *** * * = 0;i<n;i ++)
    {
* * * ** ** * * ** *** *** * * ** *** ** * ***** **
*** * * * ** * ******** * **** *** * * = i+1;j<n-1;j++)
* * ****** *** ** * *** ** *** * *
** * * * * * * * * * * **** * * * * * **** > arr[i])
**** * * * * ** ********** ** * *** * **** ** * **   
** ****** ***** * **** **** ** ***** * ** ** *** * * ** **** =  arr[j];
**** ** * **** * * * * *** * * * ** ** * * ** * * * **** * ** ** = arr[i];
* ***** * * * ******** * ** * * ***** ******* * *** *** * = temp;
* ** * * * ** * ** ** ** **** * * ****** * ***** *** *   
** * ** ** * * * ** ** *** ** * *
    }
    
* * ***** **** ** * * *** = arr[0];
** ** * *** *** ** * * * = 1;
*** * * * ***** * ** *** * * * *
**** * * *** *** ** = 1;k<n-1;k++)
** * *** ****** ** *
* *** ***** * *** ** * * * * * ** ** * = arr[k])
** ** ** * * ** * ** * * **** **
***** ** *** * ** * * * ** * * ** * **** ** * ** **** ++;
* ** * *** * * * *** *
* ** **** * * ** ** ** * * * * * *
* ** ** * ** ***** * ** * **** ** * * **** ** * * * * * * * *** = 1;
* * ******* **** * * * * *** ** * *** * ** > max_length)
** * ** **** * * *** * * * * * ***
* * ** ***** * * * * * * * * * **** = current_num_length;
*** * ** * *** * * ** ** * * ** **** * * = current_num;
* * * **** *** * ** *** *** *** *** ** * ** * * *** * * * * * * *
** * ** ** *** ** *** * * * *
* * **** ***** * * * *
* * *** * * ** * * *** * %d * * * ** *** ***** * *     
    
** * *** * ** *** * ***** 0;
}
answered by (212 points)
0 0
Case 0: Wrong output
0 0
-----------Re-judge-----------
Case 0: Wrong output
0 like 0 dislike
Hidden content!
#include<stdio.h>
int main()
{
    int x,max=0,min=0,size=0;
*** * ** ** * **** * *** ** * *** ** *
* * * ** * ** * * * arr[x],amount[x];
* * *** * * * * ** * i;
** ** *** * * * * ** * *** * * ***
* *** * * *** **** ** * ****** * ****** * * * * **** * * ****** ** *
* * ** * * ** * * *** ***
    int j;
***** * * * ** * * * ******* * * *
    {
** * * * ** * ** * * * * * * ***** * * * ** **** *
** * * ** * * ** * ** ** ** ** **** * *** * * * **** ** * *
** * * *** * ** ** ** ** ****** ***
*** ** * ****** **** * ** ** * ***** ** * * **** ** ** *
    }
** *** *** * * ** *** *** * * *
    {
** ** ** * **** ** *** ** * **** * ** *** * * * * ******
** * * ** ** ** ** * * * * *** ******* ** **
********** * ** * * ** ********* ** ***** * **** * *** * ** **** * * *** * *
**** * * * * ** ** ** * * * ********* * **** * ** * ***** * ******* **** * * **** ** * ** **
*** ** **** * * * * ** ** ** **** ** **** * * *
    }
    int temp=0;
*** * ** *** * *
    {
* * ** ** *** ** * * ** **** ***** **** ** ** **** * * *** *** *** * *
* ** ** * * ** * * * ** ***** *** * *** **
*** ** * **** * ** *** * *** **** * * ** ****** * **** * ***
* *** * * * ** * ***** * **** ** * * * * *** *** * ***** * * **
*** * * *** ** * ** ** * ********** *
    }
** ** * ******* ** *** ****** * %d %d\n",max,min,arr[size]);
**** * * * ** * ** * * ** 0;
}
answered by (190 points)
edited by
0 0
Case 0: Wrong output
0 0
Case 0: Wrong output
0 0
Case 0: Correct output
0 0
-----------Re-judge-----------
Case 0: Wrong output
0 like 0 dislike
Hidden content!
#include<stdio.h>

int main()
{
    int temp,n,most,mostt=0,big,small;
    int i,j;
** * ** ** * * *** * * * ** *** * ****** ** * * ** *
    int input[1000]={0};
**** * ** * * ***** * * * * * ** * * *
* ***** * * **** * * * * ** *** **** ***** ** *** ***** * ** *** * *
* * * * ** * * *** **** * * * * * * *** *
    {
** * * * ** * ** * * *** * * ** * ********* **** ** * ** t=0;
** * * ** ** ** * ** *** * * * ** ** *** * * * * *
*** ** *** ** * * * * **** ***
* * ** ***** ** *** * * ** ** * ** ** ** * * *** *** *** *** * **** * *** * *
*** ** * * * * * ** *** * *** * **** ** ****** * ****
* ** * ** * * * * ***** ***** * * *** * * ** *** **** ** * **** * *** * ** * ** **
*** * ** ** *** ** * ******** * ** **** * * * * * ***** ***
** * * * ***** **** **** *** * * * **
** * *** **** * * * *** ** * * * *** * *** * * *** ** * * ** * * **** * && most<input[i])
* ** ** **** * ** ** * * * *** ** **
** * *** ** * * * ** *** * **** ** ** * ** * * * ** * * * ** * * *** ****
** ** * ** * *** * * * * ** * * ** * * **** **** * *** ** ** * * * * ** **
**** ** *** * * * * * *** * * *
    }
* * * * *** * ** ** * ** ** ** * *
* *** * * *** * ***** ** ** * *
    {
*** ** ** ******* * *** * **** * ***** * * **** * ** ** ** * *
**** * ** * ** * ** * **** ** ******** * ** *
**** ** * ** **** ** * * * ** * ***** ** * * * * **** ** * *** ** * * * **** * *
* ** * ** ***** * * * * * * ** * **
    }
* *** ** * * ** * ** * ** * * * * ***
* *** * **** * **** ** ** * ** * *** ** * **
    {
* ** ******* *** *** * ** * * ** **** * * * * * * *
** * * * ** ** ** * ** *** ** * *
** ** *** * ***** * * ****** * * * * * ** * * **** * **** *** **** * ** *
* *** * * ** * * * * * ***
    }
    printf("%d %d %d\n",big,small,most);
    return 0;
}
answered by (131 points)
0 0
Case 0: Correct output
0 0
-----------Re-judge-----------
Case 0: Wrong output
0 like 0 dislike
Hidden content!
#include<stdio.h>
int main()
{
    int arr[1000];
    int i,j, n,count;
    int most=0,mostt=0,big ,small;
* * * *** * ** *** * *** ******* * *** **
* ** * * ** *** * * ** ** * ** ** ** **
** **** * * **** **** ** * *** ** * * * * *** * ** *
****** * ***** * ** ** * **** *** *
    {   
** * * * *** * * **** * ** * * ** ** *
* * ** ** ** * **** * * **** * ** ***** *** * * * ***** **
*** ***** * *** ** *** * * *** ****
**** ** ** * * * ** ** ** * ***** * * **** *** ** ** ** * * * ** * ***** * ****
** * ** ****** ** ** * * ** * * ** ** ******* * * *** ** * ** ** ** * ******
* ** ** * ** ** * **** * ******** * * * ** *** **** * **** ** **
** ***** *** * **** * * * ** * *** ** *** * * ** *** ** ** * * * * **** * && arr[i]>most)
* ** * ** ** *** * *** * ** ** **** * ******* * **** * *** **** * * *****
***** ******* * * ** * ** * ** **** ** * * **** ***** *** * *** ** * *** * ** ** * ******* * ** ** **
* ** * * * ** * ********** * * * ** * * * * ** ** * *** *** ** *** * *** * ** * ** ** *
**** ** ****** ** * * ** * * *** *** * * * ** * ****** *
** * ** ** * * * ** ** * * ** **** **
     }
     
*** ** * * ** ** ** **** * ******** * ***
* ***** * * * * ** * ** * * ***********
     {
**** *** *** ********* * * ***** ***** * ** ** * * * *** *** *
* * * * * ** * ** ** * **** **** *** **** ***** ***** *
* * ** ** * * *** ** * ** ** * ** **
**** *** ** ** * *** *** ** *******
*** ** * * ** ** * *** ** *
* ** ** ** ** **** *** * * *
     {
** * * ** ** * * *** ** * * *** * * **** ****** *
* * ** *** * * ** *** * * * ** * * * ** ** * *** ***
******* * * *** ** * * *** ***
* *** * * ** * * * **** * ** * **
* * * * ** *** * ** * ** ***** %d %d\n",big,small,most);
      
}
answered by (172 points)
edited by
0 0
prog.c: In function 'main':
prog.c:9:16: warning: format '%d' expects argument of type 'int *', but argument 2 has type 'char *' [-Wformat=]
        scanf("%d",&arr[i]);
                ^
0 0
Case 0: Wrong output
0 0
Case 0: Wrong output
0 0
-----------Re-judge-----------
Case 0: Wrong output
0 like 0 dislike
Hidden content!
#include<stdio.h>
int main()
{
    int n, temp, i, j,current num, current numlen;
* ***** * ****** **** * *** ** ** ** * ***
** * * ** ** * ***** * * * *
**** * * *** ** * **** ** * ***** **** * * * ** * * *** **** **
*** * * * * * * **** * *
** **** * * * ** * **** * * * * * * * ** ** * * ** *** * * * ** ******** ** * ***** * *** * ** * * * * **** * ***
* * **** ** * ** ** ** * * ** ** ** **** * * *****
* *** * *** ** ** * * * * *** ** *** *** * *** * * ** * * *** ** *** *
*** * * ******* **** * * ** * * ** ** * ** ** ** * ** * * ******* ** **
**** * * * * * ** **** * *** * * * * * * ** ** ** * * **** ** * *
** ** ** * *********** * * * *******
    }
    current num=num[0];
    current numlen=0;
*** * * ** * ** ** * **** * * ** num);
** ** * *** * * * * ** **** ******* * *
** ******** * ***** ** ** * * * ***** *
* ** * ***** * ******* * * * ***** *** ****** *
*** * * * ** * * * ***** * ** * * *** *** ** * * ** * *** * * numlen++;
*** ** * * * * *** * * *** ** * *** if(num[i]!=num[i+1])
*** ** **** * ****** ** *** *** * ** * * * * * ******* ** num=num[i+1];   
    } * * ** *** * * ** *** *
** * * ***** ** ** * * * *** ** ** * * numlen); * ******* ** * ** * ** **
* ***** * ** * * ** ** **** *
    return 0;
}
answered by (144 points)
0 0
prog.c: In function 'main':
prog.c:4:31: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'num'
     int n, temp, i, j,current num, current numlen;
                               ^~~
prog.c:7:20: error: 'num' undeclared (first use in this function)
        scanf("%d",&num[i]);
                    ^~~
prog.c:7:20: note: each undeclared identifier is reported only once for each function it appears in
prog.c:9:25: error: expected ';' before ')' token
        for(j=i+1,j<n;j++){
                         ^
prog.c:16:5: error: unknown type name 'current'
     current num=num[0];
     ^~~~~~~
prog.c:16:20: error: subscripted value is neither array nor pointer nor vector
     current num=num[0];
                    ^
prog.c:17:5: error: unknown type name 'current'
     current numlen=0;
     ^~~~~~~
prog.c:18:17: error: 'current' undeclared (first use in this function)
     printf("%d",current num);
                 ^~~~~~~
prog.c:18:25: error: expected ')' before 'num'
     printf("%d",current num);
                         ^~~
prog.c:19:20: error: subscripted value is neither array nor pointer nor vector
     printf("%d",num[n-1]);
                    ^
prog.c:21:14: error: subscripted value is neither array nor pointer nor vector
        if(num[i]==num[i+1])
              ^
prog.c:21:22: error: subscripted value is neither array nor pointer nor vector
        if(num[i]==num[i+1])
                      ^
prog.c:22:19: error: expected ';' before 'numlen'
           current numlen++;
                   ^~~~~~
prog.c:23:19: error: subscripted value is neither array nor pointer nor vector
        else if(num[i]!=num[i+1])
                   ^
prog.c:23:27: error: subscripted value is neither array nor pointer nor vector
        else if(num[i]!=num[i+1])
                           ^
prog.c:24:19: error: expected ';' before 'num'
           current num=num[i+1];
                   ^~~
prog.c:26:25: error: expected ')' before 'numlen'
     printf("%d",current numlen);
                         ^~~~~~
0 0
prog.c: In function 'main':
prog.c:4:31: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'num'
     int n, temp, i, j,current num, current numlen;
                               ^~~
prog.c:7:20: error: 'num' undeclared (first use in this function)
        scanf("%d",&num[i]);
                    ^~~
prog.c:7:20: note: each undeclared identifier is reported only once for each function it appears in
prog.c:9:25: error: expected ';' before ')' token
        for(j=i+1,j<n;j++){
                         ^
prog.c:16:5: error: unknown type name 'current'
     current num=num[0];
     ^~~~~~~
prog.c:16:20: error: subscripted value is neither array nor pointer nor vector
     current num=num[0];
                    ^
prog.c:17:5: error: unknown type name 'current'
     current numlen=0;
     ^~~~~~~
prog.c:18:17: error: 'current' undeclared (first use in this function)
     printf("%d",current num);
                 ^~~~~~~
prog.c:18:25: error: expected ')' before 'num'
     printf("%d",current num);
                         ^~~
prog.c:19:20: error: subscripted value is neither array nor pointer nor vector
     printf("%d",num[n-1]);
                    ^
prog.c:21:14: error: subscripted value is neither array nor pointer nor vector
        if(num[i]==num[i+1])
              ^
prog.c:21:22: error: subscripted value is neither array nor pointer nor vector
        if(num[i]==num[i+1])
                      ^
prog.c:22:19: error: expected ';' before 'numlen'
           current numlen++;
                   ^~~~~~
prog.c:23:19: error: subscripted value is neither array nor pointer nor vector
        else if(num[i]!=num[i+1])
                   ^
prog.c:23:27: error: subscripted value is neither array nor pointer nor vector
        else if(num[i]!=num[i+1])
                           ^
prog.c:24:19: error: expected ';' before 'num'
           current num=num[i+1];
                   ^~~
prog.c:26:25: error: expected ')' before 'numlen'
     printf("%d",current numlen);
                         ^~~~~~
0 like 0 dislike
Hidden content!
#include<stdio.h>
int main()
{
    int x,max=0,min=0,size=0;
*** *** * * *** ** * * * * * *** * * *** ******
* ** *** * ** * ** * **** arr[x],amount[x];
* * ** ** ** * **** ** *** i;
* *** * **** ** ** **** * * ** **
***** * ** * **** * *** **** * *** ** * **** * **** ** ** * * * *
** * * * *** ******
    int j;
* * ** * * * * * * * * * ** ** *** **
    {
** **** ** *** * ** * * * * **** * ** * ******* ***
* ***** ** ***** *** ** * *** *** * ** * * ** **** ** ** * ** * ***
** * *** * ** * *** * * *** * * **** ** * ***** * *
** * ** ** * **** ** ** * *** * * **** * ** **** * * *** * * ** **
    }
* *** * ** ** *** * ** * ****** **
    {
* * **** ** * ** * ** *** ** * ** ** ** *
* ** ** * *** ***** * * * * **** *** *** ***** *
**** ****** * * ****** **** * * **** * * * * **** ***** * **** ** **** *
*** ** ** *** **** * **** * ** ** * *** * ** * ** ***** ** * * * * *** * ** * * * ** **
** * ** ** * * * **** * * *** *** * * **
    }
    int temp=0;
* * * **** * * * **** * *** ***
    {
* ******* * * * * **** **** ** * ** * *** * * * **** ** * ****** ** * ***
** * * * * ********* ** ** * *** ** **** * *
* * * ** *** ***** *** ** * * * * * ** *** ** ** * * * ** ** * *
* **** **** *** **** * * * ** ******** * * ** * **** ** ** ** ** *** * ** ***
* *** *** * * ** * ** * *** * ** * * *
    }
* ** ***** **** *** * %d %d\n",max,min,arr[size]);
* * * * ***** * 0;
}
answered by (196 points)
edited by
0 0
Case 0: Wrong output
0 0
prog.c: In function 'main':
prog.c:9:16: warning: format '%d' expects argument of type 'int *', but argument 2 has type 'char *' [-Wformat=]
        scanf("%d",&arr[i]);
                ^
0 0
Case 0: Correct output
0 0
-----------Re-judge-----------
Case 0: Wrong output
Welcome to Peer-Interaction Programming Learning System (PIPLS) LTLab, National DongHwa University
English 中文 Tiếng Việt
IP:108.162.241.32
©2016-2025

Related questions

2 like 0 dislike
5 answers
[Exam] asked Dec 23, 2017 in 2017-1 程式設計(一)AD by 楊修俊 (30k points)
ID: 38942 - Available when: 2017-12-23 09:00 - Due to: 2017-12-23 12:10
| 2.4k views
2 like 0 dislike
18 answers
[Exam] asked Dec 23, 2017 in 2017-1 程式設計(一)AD by 楊修俊 (30k points)
ID: 38941 - Available when: 2017-12-23 09:00 - Due to: 2017-12-23 12:10
| 6.5k views
3 like 0 dislike
16 answers
[Exam] asked Dec 23, 2017 in 2017-1 程式設計(一)AD by 楊修俊 (30k points)
ID: 38939 - Available when: 2017-12-23 09:00 - Due to: 2017-12-23 12:10
| 7.2k views
3 like 0 dislike
12 answers
[Exam] asked Dec 23, 2017 in 2017-1 程式設計(一)AD by 楊修俊 (30k points)
ID: 38938 - Available when: 2017-12-23 09:00 - Due to: 2017-12-23 12:10
| 5k views
2 like 0 dislike
3 answers
[Normal] Coding (C) - asked Dec 20, 2017 in 2017-1 程式設計(一)AD by 楊修俊 (30k points)
ID: 38168 - Available when: Unlimited - Due to: Unlimited
| 1.5k views
12,783 questions
183,442 answers
172,219 comments
4,824 users