1 喜歡 1 不喜歡
10.7k 瀏覽

The 13-digit International Standard Book Number (ISBN) is a unique code that identifies a book commercially. The last digit is a check digit used for error detection. To calculate its value, each digit of the first twelve digits is alternately multiplied, from left to right, by 1 or 3. The products are summed up and divided by 10. The check digit is the remainder of the division subtracted from 10. If it is 10, it becomes 0. 

ISBN檢查號的計算方法: 前12個數字,奇數項 乘以 1 , 偶數項乘以 3

For example, assume that the first twelve digits are 978960931961.  

假設號碼前12位是978960931961

(a) (9*1 + 7*3 + 8*1 + 9*3 + 6*1 + 0*3 + 9*1 + 3*3 + 1*1 + 9*3 + 6*1 + 1*3) = 126 

(b) The check digit = 10 – (126 % 10) = 10 – 6 = 4  

檢查號 = 10 - 餘數 = 10 – (126 % 10) = 10 – 6 = 4  

So the valid ISBN is: 9789609319614

Write a program that reads a 13-digit ISBN and checks the last digit to see if it is valid or not. 

寫一個輸入13位ISBN號碼 判斷最後一個數字是否檢查碼即可

#Try 1:

Input:

9789609319614

Output: 

Valid ISBN

 

#Try 2:

Input:

9781482214505

Output: 

Valid ISBN

 

#Try 3:

Input:

9780132936493

Output: 

Invalid ISBN

 

[考試] 最新提問 分類:Midterm | 用戶: (12.1k 分)
ID: 32706 - 從幾時開始: 2017-11-15 14:10 - 到幾時結束: 無限制
| 10.7k 瀏覽

49 個回答

0 喜歡 0 不喜歡
內容已隱藏
#include * ** *
#include * * **** ******

int main()
{
** * ** ***** * *** *** * ***** * *
** ** * * * **** * * *** *** * * * * * * **** * ** ***** ** **** ** * ** ** * * * * * * ** * ** * *** *** ** **** *** **** * * *
* ** * ** *** ** * *** + b*3 + c*1 + d*3 + e*1 + f*3 + g*1 + h*3 + i*1 + j*3 + k*1 + l*3;
* *** ** ** ** ** * * ** * * **
**** * * * * * * * (ans==m)
** ** * * ** * *** **** *** ISBN");
* ** *** * ** *** * *
* * *** *** * *** * ** * ** ** * * ISBN");
** * * * * * ****** *** 0;
}
最新回答 用戶: (-258 分)
0 0
Case 0: Correct output
Case 1: Correct output
Case 2: Correct output
Case 3: Correct output
0 喜歡 0 不喜歡
內容已隱藏
#include ** * * *****

int main()
{
** * * ** ** * whole;

** * ***** * **** *** *** * ** * ******** ** * *
** **** *** * ** ** * * * * * * ***** * * ** * * * * ** **** *** * ** ** * ** &n6, &n7, &n8, &n9, &n10, ** ** ** *** * * &n13);



whole = * * ** ******* **** ******** * * * *** * *

int temp = whole%10;


if * ** **
** ***** ** * * ** *
** * * ** ** * * ** ** ** ** ** * ** *** * * *** ISBN");
*** * **** ** * *** **
* * *** * * * ** * * *
* * *** * * ** ***
** **** * * * *** * * * ** * **** * * * * * * * ** ******* ** **** * ISBN");
** ** * **** ** * * ** **

***** * * * *** * * ***** 0;
}
最新回答 用戶: (323 分)
0 0
Case 0: Correct output
Case 1: Correct output
Case 2: Correct output
Case 3: Correct output
0 喜歡 0 不喜歡
內容已隱藏
#include * ** * ******

int main()
{
* *** ** * ***** whole=0;

*** * * * ******* * ** * * * * ****** *** * ** *****
** * * ** * ** ******** ** ** * * *** *** *** ***** *** *** ** * * ** **** **** * &n6, &n7, &n8, &n9, &n10, ** **** * ***** &n13);



whole = **** * ** *** * ****** ** ***** * * * *** *



if ((10-(whole%10))==n13)
** ***** *
* *** **** * *** **** * ** ** *** ** ** * ** * ** * * * * * ** ISBN");
** * * * ** * ** *
* ** *** *** **** ** *
* ** ** * * *****
** ****** ** * ** * * ** * ** * * * **** * * ** ** ** ** ** ISBN");
* * ** * ** * * ** * * ** *

* * * **** * * ** 0;
}
最新回答 用戶: (323 分)
0 0
prog.c: In function 'main':
prog.c:8:11: warning: too many arguments for format [-Wformat-extra-args]
     scanf("%1d1d1d1d1d1d1d1d1d1d1d1d1d", &n1,&n2,&n3,&n4,&n5, &n6, &n7, &n8, &n9, &n10, &n11,&n12, &n13);
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
0 喜歡 0 不喜歡
內容已隱藏
* * * ***** * *
main()
{
long int **** * * **
********* * * * input **** ** *
** ** *** *** ** * * **
if * ** *** *
** * * ** ** ** ** * * * * * * * *
if *** * ** * *******
* **** ** **** ******* * * ** *** **** ** ** *

** * * * ** ***
** ** * * * * * *
* * ****
* * **
*** *** * * *
** * * ** ** ** *
*** ** ***
**** * * * ***
* * ***** **
* * * *
**** * ***
m==a%100/10;//2
n==a%10;//1

*** ***** ** * ***
o==10-(sum%10);

if (n = o)
{
** *** *** * ** * * * ** *** * ISBN");
}
if (n != o)
{
* ** * * * * *** **** *** * ** ** * ISBN");
}
return 0;
}
最新回答 用戶: (-32 分)
0 0
prog.c:2:1: warning: return type defaults to 'int' [-Wimplicit-int]
 main()
 ^~~~
0 喜歡 0 不喜歡
內容已隱藏
#include **** ** * **

int main(){
* * ** long long int n;
* *   int temp=0;
******   int n1=0,n2=0;
* * * *** * * int value[13];
**   int i,j;
* * **   int check;
* * *   int value2;

* * *   * **** * * * ** *** *

* ** ** for(i = 0; i < 13; i++){
* *** *** **** ***** * **** * **** * *** ** = n%10;
** ** * ** ** * * ** ***** * = temp*3;
***** * ** * * * **** * ** ** ****** *** * ***** **

** *** * * ** ** ** ** *** ** ** * *** ** **** * *** = n%10;
** ****** * * **** ** * *** *** *** * ** * * ***** ** = temp;
*** * *** * ** * * ** *** * * **** * *
*** **** ** ** ***** * *** **** * ** = * * *
* ** * **** * ** * * * *** * ** * * ** ** *
* **   }
* * ** ** * * ** * ******** ** * value2);

**** *** * ***** * ** *

**** * *** ** * * ***** * *
** ****** ** *** * * ** * ** ** **** * * ** *** * * * *** ** * * ******* * **
* * *** * * * **** * * * *
* **** ** * * ** * * **** ** *** * * ****** * * ** * ****


** *   return 0;
}
30/100 最新回答
0 0
prog.c: In function 'main':
prog.c:12:10: warning: format '%d' expects argument of type 'int *', but argument 2 has type 'long long int *' [-Wformat=]
  scanf("%d", &n);
          ^
0 喜歡 0 不喜歡
內容已隱藏
#include * * **** *
int main ()
{
*** * ** ** ** * *** a;
**** *** * * * *** *** *** ****** ** * *
** ** * * ** * ** * ** *** * ** * * ** *
* **** * * ** ** * * * 0;
}
最新回答
0 0
prog.c: In function 'main':
prog.c:5:10: warning: too many arguments for format [-Wformat-extra-args]
    scanf("number",&a);
          ^~~~~~~~
prog.c:6:11: warning: too many arguments for format [-Wformat-extra-args]
    printf("Valid ISBM",a);
           ^~~~~~~~~~~~
0 喜歡 0 不喜歡
內容已隱藏
#include<stdio.h>
int main()
{
** **** * ** * ** ***** a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11, a12, a13, sum1,sum2, sum3, check;
***** * ** * ******* ** * * * ** *** * * * *** * ***** ** * * * ** ****** *** * * * ** * * * ** * * * ** **** * ** * ** **** **** ** ** **

*** ******* * *** **** * * * ** * * *
*** ** * * **** ** * ** ** * * * * * * *

** * ** * * * * *** ** * sum1+sum2;
* **** *** *** * ** *** 10 - (sum3%10);

*** **** * * * ** ** * * * *** *
* * * ** **** * *** *
** *** ** **** * * * ** ****** **** ** ** ** * ** *** ISBN");
*** ** * * ** ** *
**** * ** *** ** ** ** * *
** ***** ****** ** * **
*** ** ** ***** * * * **** ********* ** * *** * * * * IBSN");
*** * * * *** *******

** **** * ** **** 0;
}
20/100 最新回答 用戶: (-233 分)
0 0
prog.c: In function 'main':
prog.c:5:14: warning: format '%ld' expects argument of type 'long int *', but argument 2 has type 'int *' [-Wformat=]
     scanf("%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld", &a1,&a2,&a3,&a4,&a5,&a6,&a7,&a8,&a9,&a10,&a11,&a12,&a13);
              ^
prog.c:5:17: warning: format '%ld' expects argument of type 'long int *', but argument 3 has type 'int *' [-Wformat=]
     scanf("%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld", &a1,&a2,&a3,&a4,&a5,&a6,&a7,&a8,&a9,&a10,&a11,&a12,&a13);
                 ^
prog.c:5:20: warning: format '%ld' expects argument of type 'long int *', but argument 4 has type 'int *' [-Wformat=]
     scanf("%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld", &a1,&a2,&a3,&a4,&a5,&a6,&a7,&a8,&a9,&a10,&a11,&a12,&a13);
                    ^
prog.c:5:23: warning: format '%ld' expects argument of type 'long int *', but argument 5 has type 'int *' [-Wformat=]
     scanf("%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld", &a1,&a2,&a3,&a4,&a5,&a6,&a7,&a8,&a9,&a10,&a11,&a12,&a13);
                       ^
prog.c:5:26: warning: format '%ld' expects argument of type 'long int *', but argument 6 has type 'int *' [-Wformat=]
     scanf("%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld", &a1,&a2,&a3,&a4,&a5,&a6,&a7,&a8,&a9,&a10,&a11,&a12,&a13);
                          ^
prog.c:5:29: warning: format '%ld' expects argument of type 'long int *', but argument 7 has type 'int *' [-Wformat=]
     scanf("%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld", &a1,&a2,&a3,&a4,&a5,&a6,&a7,&a8,&a9,&a10,&a11,&a12,&a13);
                             ^
prog.c:5:32: warning: format '%ld' expects argument of type 'long int *', but argument 8 has type 'int *' [-Wformat=]
     scanf("%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld", &a1,&a2,&a3,&a4,&a5,&a6,&a7,&a8,&a9,&a10,&a11,&a12,&a13);
                                ^
prog.c:5:35: warning: format '%ld' expects argument of type 'long int *', but argument 9 has type 'int *' [-Wformat=]
     scanf("%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld", &a1,&a2,&a3,&a4,&a5,&a6,&a7,&a8,&a9,&a10,&a11,&a12,&a13);
                                   ^
prog.c:5:38: warning: format '%ld' expects argument of type 'long int *', but argument 10 has type 'int *' [-Wformat=]
     scanf("%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld", &a1,&a2,&a3,&a4,&a5,&a6,&a7,&a8,&a9,&a10,&a11,&a12,&a13);
                                      ^
prog.c:5:41: warning: format '%ld' expects argument of type 'long int *', but argument 11 has type 'int *' [-Wformat=]
     scanf("%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld", &a1,&a2,&a3,&a4,&a5,&a6,&a7,&a8,&a9,&a10,&a11,&a12,&a13);
                                         ^
prog.c:5:44: warning: format '%ld' expects argument of type 'long int *', but argument 12 has type 'int *' [-Wformat=]
     scanf("%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld", &a1,&a2,&a3,&a4,&a5,&a6,&a7,&a8,&a9,&a10,&a11,&a12,&a13);
                                            ^
prog.c:5:47: warning: format '%ld' expects argument of type 'long int *', but argument 13 has type 'int *' [-Wformat=]
     scanf("%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld", &a1,&a2,&a3,&a4,&a5,&a6,&a7,&a8,&a9,&a10,&a11,&a12,&a13);
                                               ^
prog.c:5:50: warning: format '%ld' expects argument of type 'long int *', but argument 14 has type 'int *' [-Wformat=]
     scanf("%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld%ld", &a1,&a2,&a3,&a4,&a5,&a6,&a7,&a8,&a9,&a10,&a11,&a12,&a13);
                                                  ^
0 喜歡 0 不喜歡
內容已隱藏
#include <stdio.h>
#include <stdlib.h>

int main()
{

** *** ** * ** ** ** * * * isbn;
*** ** * ***** * ** * * * s1;
* ** **** ** * * s2;
**** **** * *** *** **** s3;
* **** *** **** * ** * s4;
* * ** * * *** * ** s5;
** * ** * * * ** s6;
* * * * * * *** s7;
** * ** * * ** * s8;
** * ** * ** ** * *** * s9;
* **** *** * * * ** * * s10;
** ** ** *** * * ** ** * * * s11;
*** * * ** *** * ** s12;
* ** *** ** * * * * * s13;
    int check;
* * ** ** * * ** *** sum;

** **** *** ** *** * * * * ** **** **** * ***

**** * ****** *** * * * *
* ** * * ** *** ****** * **** *
** ** ** * * ** ** ** * *** * ** * ** * *
** * * * **** * * **** ****** * ** **
* * * *** *** * ** * * * ** ***** *****
** * * * *** * * ** * **** * * * *
* **** *** * * * *** * * * **
** *** * * *** *** * * * ** ** * *
* ***** ***** ***** * * * ** * **
**** *** ** * * *** ** ** * ** ** *
** * * *** ** * **** * ** * ** *
** * *** * * **** ** **** * * ** ** * *
*** ** ********** * * * * * ** **** ***

* **** * *** **** * *** * * * * * *

* * *** *** * * * ** ** **** *** =(10-(sum%10));

** ****** ** *** * * *** *** == s13)
    {
* *** * ******* ** * * * ****** ** ** ** * ** *** ** ** ISBN");
    }

* * ** ** ** * ** * ** *
    {
* * ** ** **** * ** * ** * * *** * **** * **** ISBN");
    }

* *** ****** * ****** * ** * ***** * * * * 0;
    }
最新回答 用戶: (-193 分)
0 0
Case 0: Wrong output
Case 1: Wrong output
Case 2: Correct output
Case 3: Correct output
0 喜歡 0 不喜歡
內容已隱藏
    #include <stdio.h>
#include <conio.h>

int main()
{

** ** * ** * ****** ** isbn;
** * *** * ** ** **** * s1;
** ** ** * * ***** * s2;
* * * * * *** **** **** s3;
* ** * ***** ** * *** s4;
*** * **** * ***** * s5;
**** ** *** ** ** *** * s6;
** * * * * * * * s7;
** *** ** ***** * ** ** s8;
** * * * * ** *** ** ** * s9;
**** * * * * ** ** ** s10;
* ** *** * ** **** ** s11;
** ** * * *** ***** * s12;
* ** ** ******** * * ** s13;
*** * *** * * **** * * * check;
    int sum;

* * * *** * ******** * ** * ** *** &isbn);

* * ** * **** ***** ** ** * *** * *
*** ***** * * * * **** * * ** *
* *** ** ** * * ** ** ******* **** **** * ** *
* * *** ** * ** * * * * ** *** * ** *
* *** **** * ***** * *** ** **** * * * *
* *** ** *** * ******* * * ** ***** * * *
* * * ** ** ** *** * * * * ** * ** *
* * ***** **** ** * *** ** * **
* ** *** * ** * * * * * *** * *
* * ** ** * ** * ** ** *
** *** ** ** ** * ** ** ****
* ** * * ** * ** ******* ** * * * **
** *** * * ** * * * * *

** * * * * * ** * *** **** **** * * **

***** * * *** * * ****** ** * *

**** ** ***** * * *** * * ** == s13)
    {
* * ***** *** ***** * * ***** ** * ** * ** ** * * **** ISBN");
    }

* * * *** **** * ** *** *
    {
** ** * * ** * * *** * * ** ** * ******* ISBN");
    }

******* ** ** * * ***** * * *** * * * 0;
    }
最新回答 用戶: (-193 分)
0 0
prog.c:2:19: fatal error: conio.h: No such file or directory
 #include <conio.h>
                   ^
compilation terminated.
0 喜歡 0 不喜歡
內容已隱藏
#include<stdio.h>
int main(void)
{
    int n1,n2,n3,n4,n5,n6,n7,n8,n9,n10,n11,n12,n13,sum,check;
* ** *** ** * * * ** ***** ** * ** ** * ** * ** * *** *** ** ***** ** **** * * * * * ** * * *** * * **** * * * *** ** * * * * **** ** *

***** ** *** ***** ** ** * * * * * **** * * * * * * *
***** * ***** ** ** ** ** *** *

**** * *** * * *** ** ** * * ** *
    {
* * ** **** ** *** * * * ***** * * * *** *** ** *
    }

* ** * * * ** * * * * ** ** * * * * * * ** * **
** * * * ** * * * * ** ** ** ** * * * * * * *
** ** *** * * * * * ** * ** ***** **** ** *** *** ***** * ** ** ** * *** ** * ** * * ISBN");
* *** ****** ** ** * * *** * ****** ** ** * *
** *** *** ** *** * * * * * * **** ** ****
*** * ** ***** ** ** * ** * * * * ** ****
**** * ** ** * * ** * **** * * **** * * * * *** ** ******** * * ** * *** * ** * ISBN");
*** * ** * ** ****** ** * * * ** ** *** ** *
return 0;

}
最新回答 用戶: (-249 分)
0 0
Case 0: Wrong output
Case 1: Wrong output
Case 2: Correct output
Case 3: Correct output
Welcome to Peer-Interaction Programming Learning System (PIPLS) LTLab, National DongHwa University
English 中文 Tiếng Việt
IP:172.70.50.61
©2016-2026

相關問題

0 喜歡 0 不喜歡
26 回答
[考試] 最新提問 12月 9, 2017 分類:Midterm | 用戶: thopd (12.1k 分)
ID: 36751 - 從幾時開始: 2017-11-15 14:10 - 到幾時結束: 無限制
| 6.9k 瀏覽
2 喜歡 0 不喜歡
77 回答
[練習] Coding (C) - 最新提問 10月 19, 2017 分類:Chapter 5: Selection Statements | 用戶: thopd (12.1k 分)
ID: 27667 - 從幾時開始: 無限制 - 到幾時結束: 無限制
| 17k 瀏覽
12,783 問題
183,442 回答
172,219 留言
4,824 用戶